|
 |
||||
|
Notice: Undefined variable: categoryid in /Websites/rvplane.com/public_html/main.php on line 45
I popped off the plenum from the engine block where I made a seal for it the other day. Holy cow was it hard to get the plenum removed. I ended up making a custom tool out of a coat hangar to break the bead around the engine. This tool a solid hour of work to get off.  The bead looked pretty good. Not great, but better than nothing. I am thinking it is good to go as it is. I then spent some time cleaning off all of the residue left on the engine case.  Back to the empennage tips -- I riveted and added some stryofoam fillers to the horizontal stablizer tips.  Riveted and glassed the elevators too.  The right elevator's tip wasn't tight against the counterweight lead, so I put some epoxy/flox mixture in there and clamped it for overnight.  While all of that was drying, I slabbed on some Rage Gold onto the rudder. Since there aren't that many complex countours to deal with I am hoping this will be easy to sand and feather out.  Notice: Undefined variable: categoryid in /Websites/rvplane.com/public_html/main.php on line 160
|
|||||
|
http://RVplane.com |
Last Modified: October 5, 2024 |