|
 |
||||
|
Notice: Undefined variable: categoryid in /Websites/rvplane.com/public_html/main.php on line 45
Well this week sucked royally. I had a final exam and a term paper due, neither of which I started until the last minute. So that ate up the past three nights. Good news is grad school is on break for the next three weeks and I should be able to kick some ass on the project. With the canopy fitted I removed it and the rear window. I placed the rear window in the basement to warm up because I have to finish the front edge of it still and polish the edges.  I spent a ton of time masking off the canopy for all of the spraying I will have to do to it. This was a majority of tonights work.  I used some cheap masking tape to hold the protective plastic on the rear window. Since it has been on so long, when I removed it the other day it left a nasty residue. I read that using acetone and lacquer thinner are big no-no's on plexiglass. The recommended solvent is Kerosene. I was lucky enough that my local Ace Hardware dispensed Kerosene. I needed to buy this 1 gallon container because they wouldn't dispense it into anything "not approved". BS if you ask me because that's only protecting the idiot that doesn't know any better. All I needed was 0.1 gallons of the stuff.  I brought the primer and filler into the house to warm up. Its cold and snowing now, and I don't think either of these like to be mixed when they're cold.  Finally, I ordered one of these cutaway RV-7 drawings from TJ Tech Art. The drawings aren't cheap, but damn are they ever cool.  Notice: Undefined variable: categoryid in /Websites/rvplane.com/public_html/main.php on line 160
|
|||||
|
http://RVplane.com |
Last Modified: October 5, 2024 |