|
 |
||||
|
Notice: Undefined variable: categoryid in /Websites/rvplane.com/public_html/main.php on line 45
More work on the vertical stabilizer tip installation. I was able to drill it to the vertical stabilizer and trim the aft edge.  I will need to build up the top of the new tip to match the old tip.  I reinforced the inside of the tip with some balsa wood epoxied into place.  With the epoxy curing, I moved onto installing the oil cooler shutter. It is getting warmer out, so I needed to remove the blocking plate anyways.  I added some metal to the inboard edge of the oil cooler shutter to be able to attach a cushioned clamp.  Boom! Installed.  I sealed as best as I could all of the openings on the top and bottom of the oil cooler. Hopefully I should be able to install the control knob inside tomorrow and perhaps test it out!  Notice: Undefined variable: categoryid in /Websites/rvplane.com/public_html/main.php on line 160
|
|||||
|
http://RVplane.com |
Last Modified: October 5, 2024 |