|
 |
||||
Today I finished off the j-stiffeners. The only thing I needed to address was modify the aft end of all 6 stiffeners. I used a unibit to make a nice transition from the two cuts I needed to make.  After two slices with a die grinder and a little sanding, the cut is done.  Repeat 6 times and the stiffeners are done! Now its time for the aft fuselage. I got all of the parts for the aft fuselage out today but didn't have time to really play with it. 
|
|||||
|
http://RVplane.com |
Last Modified: October 5, 2024 |