[<<Prev]
[Next>>]
[December 9, 2006]


It was a quick night in the shop because today I spent all day at a Enginer Builders workshop at Teledyne Mattituck. Great course and good intro to engines. After I drove home (5 hours) I took care of riveting the nutplates onto the z-brackets. Well, I almost finished it. I was one nutplate short. Then I screwed them all to the spar. I didn't want to make too much noise, so I didn't rivet the 3 nutplates to the spar yet.
[<<Prev]
[Next>>]

http://RVplane.com

Last Modified: September 4, 2017