[<<Prev]
[Next>>]
[April 10, 2007]


Before finishing up the F-601J angle, I wanted to cleco all of the pieces to the firewall to double check I was fabricating the angle right. I gotta do it anyways, so why not.


After some artwork with the hacksaw, a vixen file and the scotchbrite wheel, voila, two angles done.


The angle is in place. I have some parts to fabricate some spacers and a doubler out of 063. I am going to take it to work where I can use the hydraulic sheer tomorrow.

[<<Prev]
[Next>>]

http://RVplane.com

Last Modified: September 4, 2017