[<<Prev]
[Next>>]
[February 25, 2011]


I found a way tonight to hold the two halves of the wheelpants together without clecoes. This will make filling and sanding much faster.


My secret? I figured that a #2 screw is the same diameter as a #40 hole. So I bought a bunch of #2 tiny screws and nuts from the local hardware store. I countersunk the #40 holes on the front half of the wheelpants.


And then put on some washers and nuts on the inside. These are tough to work with because they are soooo small.


These ting screws worked wonders! I was able to put on 2-3 coats of Rage on each wheelpant half. They are really coming along nicely.



My roommate was messing around with his new SLR lens and snapped this pic of me.

[<<Prev]
[Next>>]

http://RVplane.com

Last Modified: September 4, 2017