|
 |
||||
Tonight I started riveting the skin on the VS. The instructions tell you to start in the middle and work yourself to the tip, then bottom then rear. Everything went smoothly. I shot and bucked and every rivet turned out fine. I completed one side then only a few on the other side. The Spar on the left side of the VS riveted  Another shot of the left side front spar. Nice and smooth!  The left side completed. It took no time to do this. I used styrofoam blocks to hold the skin off of the table. This worked a lot better than my old cardboard box method for the HS! 
|
|||||
|
http://RVplane.com |
Last Modified: October 5, 2024 |